TECHNICAL SPECIFICATION
Ref: AH0041A Ref Mcmining:PRAH0041A-AM Striking box wrench 12 points 41 mm AH0041A AlBz- DIN7444
Brand: AMPCO
| | Technical Specification:
Description |
Ampco
non-sparking products are intended for use in areas where a high risk of
fire or explosion exists,as in the presence of flammable gases or liquids.Non-magnetic
Ampco tools are recommended in military applications, mine clearance operations
and in the medical field, for MRI and other scanning equipment or equipment
using large magnets. Outstanding corrosion resistance also make Ampco tools
the professional’s choice in the most demanding and aggressive environments,on
land or water. |
Box
wrenches in the regular pattern are designed for general service. The Heavy-
Duty and Striking Face patterns are designed for the service indicated.
The Electronic Hex Box patterns are designed for the lighter service encountered
in electronic, carburetor and ignition work. Ratcheting Box and split box
wrenches are for light duty and should not be used in heavy-duty applications. |
Never
use a hammer on any wrench other than a Striking Face wrench. Use a sledge
type hammer.Never use an extension on the wrench handle. |
Certifications |
- ISO9001
AMPCO SAFETY TOOLS Aluminum Bronze (AlBz) alloy helps fulfill the recommendation
in:
- European ATEX directive
for working in Zones 0 and/or 20 of all explosion groups.
- BAM (FEDERAL INSTITUTE FOR MATERIALS RESEARCH
AND TESTING, Berlin Germany) Standard operating procedure “QMH-NEG-005”
“StAA zur Schlagfunkenprüfung von Werkstoffpaarungen” dated
2012-03-01 : non-sparking tools made of these materials are appropriate
for use in potentially explosive atmospheres of zone 0, 1, 2 and 20, 21,
22 according to directive 1999/92/EC
of all explosion groups according to IEC
60079-20-1:2010.
- EN 1127-1 and EN 13463-1
|
Specification |
REF |
s
mm |
l
mm |
g |
|
|
AH0041A |
41 |
230 |
760 |
|
|
|
|