|
TECHNICAL SPECIFICATION
Ref: AT0250A
Ref Mcmining:PRAT0250A-AM
Adjustable end wrench 250 mm AT0250A AlBz
Brand: AMPCO
|  | Technical Specification:
| Description |
| Ampco
non-sparking products are intended for use in areas where a high risk of
fire or explosion exists,as in the presence of flammable gases or liquids.Non-magnetic
Ampco tools are recommended in military applications, mine clearance operations
and in the medical field, for MRI and other scanning equipment or equipment
using large magnets. Outstanding corrosion resistance also make Ampco tools
the professional’s choice in the most demanding and aggressive environments,on
land or water. |
| Adjustable
wrenches are designed to provide a wide range of capacity in a single tool
and are a convenient wrench for service and repairmen, linemen, etc. They
are not intended to replace fixed opening wrenches for production or general
service work. |
| Do
not use an adjustable wrench to free a "frozen" nut or to final
tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer
or extension on this wrench. |
| Certifications |
- ISO9001
AMPCO SAFETY TOOLS Aluminum Bronze (AlBz) alloy helps fulfill the recommendation
in:
- European ATEX directive
for working in Zones 0 and/or 20 of all explosion groups.
- BAM (FEDERAL INSTITUTE FOR MATERIALS RESEARCH
AND TESTING, Berlin Germany) Standard operating procedure “QMH-NEG-005”
“StAA zur Schlagfunkenprüfung von Werkstoffpaarungen” dated
2012-03-01 : non-sparking tools made of these materials are appropriate
for use in potentially explosive atmospheres of zone 0, 1, 2 and 20, 21,
22 according to directive 1999/92/EC
of all explosion groups according to IEC
60079-20-1:2010.
- EN 1127-1 and EN 13463-1
|
| Specification |
| REF |
s
max. mm |
s
max inch |
I
mm |
I
inch |
g |
| AT250A |
30 |
1.3/16 |
250 |
10 |
313 |
|
|