TECHNICAL SPECIFICATION
Ref: EA1700B Ref Mcmining:PREA1700B-AM Pliers, combination, with cutter - 170 mm DIN5244 EA1700 B BeCu - DIN5244 / ISO5
Brand: AMPCO
| | Technical Specification:
Description |
Ampco
non-sparking products are intended for use in areas where a high risk of
fire or explosion exists,as in the presence of flammable gases or liquids.Non-magnetic
Ampco tools are recommended in military applications, mine clearance operations
and in the medical field, for MRI and other scanning equipment or equipment
using large magnets. Outstanding corrosion resistance also make Ampco tools
the professional’s choice in the most demanding and aggressive environments,on
land or water. |
These
are heavy-duty tools designed for the professional mechanic engaged in electrical,
communications and construction work. |
BASIC
SAFETY RULES WHICHAPPLY TO THE USE OF PLIERS
1. Pliers should not be used for cutting hardened wire unless specifically
manufactured for this service.
2. Never expose pliers to excessive heat.This may draw the temper and ruin
the tool.
3. Always cut at right angles. Never rock from side to side or bend the
wire back and forth against the cutting blades.
4. Don't bend stiff wire with light pliers.Needle nose pliers can be damaged
by using the tips to bend too large a wire. Use a sturdier tool.
5. Never use pliers as a hammer nor hammer on the handles. They may crack
or break, or blades may be nicked by such abuse.
6. Never extend the length of handles to secure greater leverage. Use a
larger pair of pliers or a bolt cutter.
7. Pliers should not be used on nuts or bolts. A wrench will do the job
better and with less risk of damage to the fastener.
8. Oil pliers occasionally. A drop of oil at the hinge will lengthen tool
life and assure easy operation.
9. Safety glasses should be worn when cutting wire, etc. to protect eyes
from being struck by the end of the object being cut.
10.WARNING: Ordinary plastic dipped handles are designed for comfort_not
electrical insulation. Tools having high dielectric insulation are available
and are so identified. Do not confuse the two. |
Certifications |
- ISO9001
AMPCO SAFETY TOOLS Beryllium Copper (BeCu) alloy helps fulfill the recommendation
in :
- European ATEX directive
for working in Zones 0 and/or 20 of all explosion groups, and M1 , M2 for
Mining.
- BAM (FEDERAL
INSTITUTE FOR MATERIALS RESEARCH AND TESTING Berlin Germany) Standard operating
procedure “QMH-NEG-005” “StAA zur Schlagfunkenprüfung
von Werkstoffpaarungen” dated 2012-03-01 : the non-sparking tools
made of these materials are appropriate for use in potentially explosive
atmospheres of zone 0, 1, 2 and 20, 21, 22 according to directive 1999/92/EC
of all explosion groups according to IEC 60079-20-1:2010.
- EN 1127-1 and EN 13463-1 |
Specification |
REF |
p
mm |
l
mm |
g |
|
|
EA1700B |
13 |
170 |
285 |
|
|
|
|