TECHNICAL SPECIFICATION
Ref: MA1155A Ref Mcmining:PRMA1155A-AM Chisel, hand - 17 x 17 x 155 mm MA1155A AlBz
Brand: AMPCO
| | Technical Specification:
Description |
Ampco
non-sparking products are intended for use in areas where a high risk of
fire or explosion exists,as in the presence of flammable gases or liquids.Non-magnetic
Ampco tools are recommended in military applications, mine clearance operations
and in the medical field, for MRI and other scanning equipment or equipment
using large magnets. Outstanding corrosion resistance also make Ampco tools
the professional’s choice in the most demanding and aggressive environments,on
land or water. |
Cold
chisels have a cutting edge at one end for cutting, shaping and removing
metal softer than the cutting edge itself such as cast iron, wrought iron,
steel, bronze, copper, etc. and a struck face on the opposite end. |
Never
use cold chisels for cutting or splitting stone or concrete. Never use a
dull chisel or one with a mushroomedhead.
Never use a blacksmiths' cold chisel with a loose or damaged handle. |
Certifications |
- ISO9001
AMPCO SAFETY TOOLS Aluminum Bronze (AlBz) alloy helps fulfill the recommendation
in:
- European ATEX directive
for working in Zones 0 and/or 20 of all explosion groups.
- BAM (FEDERAL INSTITUTE FOR MATERIALS RESEARCH
AND TESTING, Berlin Germany) Standard operating procedure “QMH-NEG-005”
“StAA zur Schlagfunkenprüfung von Werkstoffpaarungen” dated
2012-03-01 : non-sparking tools made of these materials are appropriate
for use in potentially explosive atmospheres of zone 0, 1, 2 and 20, 21,
22 according to directive 1999/92/EC
of all explosion groups according to IEC
60079-20-1:2010.
- EN 1127-1 and EN 13463-1
|
Specification |
REF |
a
mm |
s
mm |
l
mm |
g |
|
MA1155A |
17 |
17 |
155 |
240 |
|
|
|