Description |
|
ELEMENT 50/3AUTO
ELEMENT 50 AUTOMATIC
Powerful 1500w motor with a two-speed mechanical gearbox.
Fully automatic drilling. The machine drills the hole, retracts and powers off – ready to be moved safely on to the next hole.
Suitable for drilling up to 40mm diameter by 50mm depth.
CutSmart Technology – designed to protect your motor and cutter, prolonging tool life.
Quick release interchangeable handle – allowing you to operate the mag drill from either side and improving accessibility.
Internal cabling reduces the risk of damage and downtime for your magdrill.
Internal cooling – keeping your mag drill cool and allowing you to drill for longer.
At just 514mm, this magnetic drill can perform in difficult environments.
50mm max cutter diameter.
Dual motor protection system to prolong the machine’s life and prevent unwanted wear. |
KEY FEATURES |
|
THE "ELEMENT 50" IS ONE OF ROTABROACH’S MOST VERSATILE MACHINES.
- SMALL IN SIZE, COMING IN AT 460MM HEIGHT.
- DUAL MOTOR PROTECTION SYSTEM PROLONGING THE MACHINES LIFE.
- INTERNAL CABLING REMOVED THE RISK OF DAMAGE AND DOWNTIME FOR YOUR MAGDRILL.
- QUICK RELEASE INTERCHANGEABLE HANDLE – ALLOWING YOU TO OPERATE THE MAG DRILL FROM EITHER SIDE AND IMPROVING ACCESSIBILITY.
- CUTSMART TECHNOLOGY – DESIGNED TO PROTECT YOUR MOTOR AND CUTTER, PROLONGING TOOL LIFE.
- INTERNAL COOLING – KEEPING YOUR MAG DRILL COOL AND ALLOWING YOU TO DRILL FOR LONGER.
- REVERSIBLE FEATURES TO ALLOW TAPPING 13MM DRILL CHUCK THAT CAN BE USED FOR TWIST DRILLS
- CAN BE USED TO COUNTERSINK UP TO 30MM* |
SPECIFICATIONS TECHNIQUES |
|
Element 50/3 Auto |
|
Motor Specification |
230V 1500W |
No load RPM |
Low Gear: 100-265RPM / High Gear:
200-500RPM |
Max Cutting Capacity |
Diam.50 x 50mm Deep – 20mm with 2MT twist
drill |
Overall Dimension |
Height: 586mm / Width: 190mm / Length:
317mm |
Machine Weight |
18.5kg |
Magnetic Adhesion |
13500N |
Magnet Size |
200 x 98mm |
Safety Features |
Cutsmart™ Technology / Magnetic Detection /
Secondary Motor Protection |